JT-SHT-1300 Automatic Paper Roll To Sheet Cutting Machine

1300mm Width Jumbo Roll to Sheet Cutting
  • PLC and meter counter
  • Yaskawa variable frequency drive
  • 20Kg/m2 automatic braking device
  • Fully automatic tension control system
 ItemJT-SHT-1300 Automatic Paper Roll To Sheet Cutting Machine
 Max. Unwinding width 1250mm
 Max. Unwinding Diameter 1200mm
 Sheeting Length 0-999mm
 Sheeting Width 50-1250mm
 Max. Speed 100cuts/min
 Precision ±0.15mm
 Rated Frequency 50Hz or 60Hz
 Rated Voltage Three-phase, four-wire, 380V/220V
 Unwinding/Rewinding Shaft 3” (76mm) air expanding shaft (size customizable)
 Dimension 3000mm x 2000mm x 1300mm
 Weight 4000Kg


JT-SHT-1300 automatic paper roll to sheet cutting machine is suitable for cutting different size paper, such as burger paper, A4 paper, regular papers, glass paper, plastic film (PVC, OPP, PET, CPP), aluminum foil.
 1. Adopts Weinview PLC and Touch Screen and meter counter. All the working parameters can be displayed on the control monitor. Only need to set up the material thickness and initial tension data, the Micro-computer will calculate the accord data, and keep the machine working automatically until the end.
 2. Adopts with frequency inverter motor which is used to control the sheeting cutter movement, solid stable.
 3. Adopts with Servo motor from Yaskawa for the material feeding. The precision can be highly controlled by 0.2mm.
 4. Adopts with automatic braking device: 20kg/ m2 * 1PC to control the material feeding tension.
 5. Adopts with specially treated alloy sheeting cutter, which has merit for long working life and endurance.
 6. Adopts automatic tension control system which is used to keep constant tension for material working.
 7. Equipped with an auto counting system.
 8. All the electric circuit is in conformity with the CE certification.
 9. Equipped with an emergency stop switch to realize the emergency stop at any point of the machine.
 10. Adopts air blower to blow waste material off. (It’s for thinner materials)

JT-SHT-1300 Automatic Paper Roll To Sheet Cutting Machine

JT-SHT-1300 automatic paper roll to sheet cutting machine is mainly used for producing A3, A4, A5 sheets, it can be also applied for making hamburger, hotdog, sandwich wrap paper sheets.



For such automatic paper roll to A4 sheet cutting machine, it is mainly composed of several important sections, such as unwinding, transmission, slitting, sheeting, controlling, waste discharging, etc.

In order to guide you better understanding the Jota paper reel to sheet cutting machine, let’s start dissecting the roll to sheet cutter like a surgeon, starting from the unwinding department.

The unwinding part is the starting part of the paper reel cutting machine, and its main function is to carry the parent roll. After the parent roll is released by the unwinding part, material feeding starts.

In order to install the mother roll on the unwinding support, the Jota roll to sheet paper cutting machine is equipped with a fully automatic pneumatic jumbo roll loading equipment.

It only needs to pass the air expanding shaft into the mother jumbo roll, align air expanding shaft’s two sides with the clamps of the unwinding bracket, and press the control button, the mother roll will automatically rise to the appropriate unwinding height.


After the parent roll is released, it comes to material feeding, which also means the start of material transmission.

For the transmission of materials, it is important to avoid the deviation of the material during the transmission process. If the material deviates, it will affect the final slitting and cross-cutting accuracy.

In order to avoid the deviation of the material, the Jota A4 paper roll cutting machine is equipped with a deviation correction device.

The deviation correction device is mainly composed of an ultrasonic edge sensor, a linear guide, a precision linear actuator, and an edge position controller.


Edge Position Controller

With the presence of the correction device, the material can enter the slitting knife uniformly, and the slitting accuracy can be controlled within 0.15mm.

When the material enters the slitting knife, it means that the slitting part of the Jota automatic roll to sheet cutter is about to start.

The slitting part of the Jota paper roll sheeter machine is mainly composed of an upper round knife and a lower round knife. The upper round knife is pressed against the lower round knife, and the material is cut off by shear-type cutting.


This shear-type cutting method has great strength, fast cutting speed, the edges of the material after cutting are very neat and with no burrs.

When the incoming material is slit, it will continue to go to the next cross-cutting step. JT-SHT-1300 uses a large cross cutter to move up and down, then cross-cutting is realized.


In order to ensure that the cross-cutting knife moves up and down smoothly and without obstruction, our Jota engineers designed a bidirectional linear guide rail and slide block for the cross-cutting blade, as shown in the following photo:


When the cross-cutting process is completed, pages of A3, A4, A5 paper are produced.

Some customers will request to purchase an automatic stacker table from us, sort and stack 500 pages of A4 paper, and then push it from the side of the paper sheet cutter to the packaging staff, which is very convenient.

Of course, some customers’ countries require high labor costs. They will ask us to integrate the automatic stacker table and the automatic A4 paper packaging machine, so that they can avoid the employment of packaging worker.

We Jota can also provide this solution of integrating automatic stacker table and automatic A4 paper packaging machine.

If you have a high degree of automation in the production and packaging of A4 paper, you are welcome to send us an inquiry on our website. We Jota will provide a professional and detailed answer to you in time.

Paper Roll To Sheet Cutting Machine Complete FAQ Guide

The paper roll to sheet cutting machine is important to the paper printing industry. If you want to buy such a machine, then you are in the right place.

This is a complete guide to everything you should know about the paper roll to sheet cutting machine.

What Is A Paper Roll To Sheet Cutting Machine?

As the name suggests, this paper roll sheeter machine is used for cutting papers. It concentrates mostly on A3, A4, and A5 papers.

However, that is not all. The sheeter paper can also be utilized for cutting film, laminated paper jumbo rolls, X-ray PET plastic film, and much more.

How Does A Paper Roll To Sheet Cutting Machine Work?

Paper roll to A4 sheet cutting machine help to cut papers into defined sizes. If you are using a computerized machine, then it becomes easier to achieve this.

You input the sizes you want and the machine does the rest.

The output depends on the efficiency of the machine. Most machines can cut papers as well as cardboards into the right sizes.

Here’s a video on how this automatic sheet cutting machine works.

How Can I Choose The Right Paper Roll To Sheet Cutting Machine?

When choosing the right paper roll to sheet cutting machine, there are several things you should consider.

One of them is what machine size you prefer. A4 paper sheet making machine can also be classified into big and small machines.

You should base your preference on the output you want. Larger machines are best for large outputs. Smaller machines work well with small to medium outputs.

They are also categorized based on the type of knife they use. A smaller machine uses a cross cutter that has an upwards and downwards movement. Larger machines use rotary cutters. With rotary cutters, the output is faster than the smaller machines.

It is also important that you pay attention to more technical areas. This includes maximum cutting width as well as its total power.

A good machine should have at least 800 to 1200mm cutting width. Speed is also very important. The right paper roll to sheet cutting machine should have at least 70 times/minute rate.

Take a look at the video below to see how a large variant of this machine works.

Why Should I Go For An Automatic Paper Roll To Sheet Cutting Machine?

The output and efficiency levels of the machine are determined by its automation grade. With the automatic version of A4 paper cutting and wrapping machine, things move a lot faster. Most of the manual work is done automatically by the machine.

With manual paper roll to sheet cutting machines, it is a bit different. You will have to put in more effort.

It’s more reasonable then to purchase an automatic paper roll to sheet cutting machine.

What Is The Price Of A Paper Roll To Sheet Cutting Machine In India And China?

The price can be quite different. Several things affect the price of each machine. Some of these factors include the functionality of the machine and its effectiveness.

Automatic and versatile machines tend to be priced higher. When setting a budget, it is important to consider your business needs.

What Should I Consider When Getting A Paper Roll To Sheet Cutting Machine?

When getting this machine for your business, there are several things you should consider. Here are a few of them.

Warranty: a new machine that comes with a warranty is good news. You can purchase this machine with more confidence. Usually, you can expect a warranty for about a year for each product.

Cross-cutter/rotary blades: this is also an important consideration. However, your final budget will heavily influence this category.

Price: as said earlier, your budget determines a lot. It is important to aim for a reasonably priced machine. Combine this with high-level performance. That is good value for your money.

Computerized: this combines beautifully with the automatic machine. Consider getting a machine that’s computerized. It saves time and resources.

After-sales service: it’s important to trade with manufacturers that have great after-sale service. This ensures that you are not left hanging if you have an unresolved issue.

It also shows professionalism from the manufacturers. After-sales can include video technical support and free spare parts.

Supplier Location: you also have to consider the location of the supplier. Shipping costs are often affected by location, this is one thing you have to consider, and some location is related to machine industry belt, quality and price will be competitive.

Machine processing accuracy: high-performance level is important. The processing accuracy of the machine is at the center of this. Making sure the processing accuracy of the machine produced is great, this is crucial.

Knowing exactly what you want in a machine will help you make the right choice.

Should I Get A Used Paper Roll To Sheet Cutting Machine?

It depends. If you are looking for a quick solution on a low budget, then yes. However, remember that it comes with some disadvantages.

You miss out on some of the features of a brand new machine. For example, you can not expect a warranty to come with your used machine.

Another factor to consider will be the lifespan of the machine. You can expect it to have a shorter lifespan when compared with new machines

The efficiency of the machine will also be lower than a new one. If you are okay with these drawbacks, then it might be a good option.

Before you decide to get a used machine, consider these factors. Also, look through your options. You might be able to afford a brand new machine.

How Do I Find A Good Manufacturer Of Paper Roll To Sheet Cutting Machine?

Finding a good manufacturer will boil down to several factors. Here are some of them.

Reputation: it is safer to go for a manufacturer that has gained some level of reputation. This gives you a bit of security.

Commendation: look for reviews and comments made by previous customers. This allows you to know what to expect when making a purchase.

Facility: You also have to look at the facilities of the manufacturer. Do they seem to have all the tools needed to get the job done? This is just one of the questions worth considering.

Finding a manufacturer that matches your needs is priceless. So take your time and consider all the factors before making a decision.

It is a safer option to find the right one late than to find a wrong one earlier.

Should I Get A Paper Roll To Sheet Cutting Machine For My Business?

Some industries definitely need a paper roll to sheet cutting machine. These industries include paper mills, printing factories and, pulp and paper manufacturers.

If your business falls into one of these industries, chances that you might buying one are high. However, make sure you plan your budget well before making a purchase.

Also, use this article as a way to guide your step.

Getting the right machine can take your business to the next level. So make the right choice today.

In order to let you know more about we Jota company, please watch the following video for reference.

We Jota could also supply following related machines, if you are also interested in any type, please feel free to send us an inquiry:

  1. Thermal Paper Slitting Machine
  2. Plastic Film, Fabric, Aluminum Foil Slitting Rewinding Machine
  3. Paper Tube Making Machine
  4. CFRP CFRTP FRP Prepreg Slitter
  5. Paper Drinking Straws Machine
  6. Label Die Cutting Machine
  7. Flexo Printing Machine
  8. Cardboard Tube Cutting Machine